RO-100M 4 Stage Reverse Osmosis System – 100gpd (16lph)

System Specification:

• System Dimensions mm – H 385 x W 357 x D 195
• System Weight kg – 6.5
• Inlet Connection – 1/4″ Pushfit
• Outlet Connection – 1/4″ Pushfit

Membrane Specification:

• Permeate Flow Rate gpd (lph) – 100 (16)
• Active Area m² – 0.54
• Stabilised Rejection Rate – 96%
• Maximum Recommended Recovery – 33%
• Operating Pressure bar (psi) – 3 – 6 (43 – 87)
• Operating Temperature °C (°F) – 5 – 45 (41 – 113)
• Feed Flow Rate lpm – 1.9 – 9.1
• Free Chlorine Tolerance ppm – <0.1
• PH Range – 3 – 10
• PH Range (Chemical Cleaning) – 2 – 11
• Maximum Feed Silt Density Index SDI – 5
• Maximum Feedwater Turbidity NTU – < 1
• Recommended Shelf Life – 2 Years

• Particle Filter – 5 micron polypropylene pre filter traps large particulates
• Carbon Cartridges – Activated carbon block reduces chlorine, taste, odour and organic impurities
• RO-1812-100 Membrane – RO Membrane Reduces heavy metals, salts, bacteria and viruses
• DI Resin Stage – Final Water polishing will clean the last remaining ions in the water and will change colour when it needs replacing
• RO and Filter Housing Spanners – Making membrane and filter replacements quick and simple to carry out
• 5M Tubing – 5 meters of 1/4″ tubing makes initial setup simple and accommodates for multiple locations
• Flow Restrictor – Applies back pressure to the membrane to increase the permeate (pure) water production and decrease the concentrate (waste) water production.
• Flush Valve – The ability of manual flushing regularly will prolong the life of the RO Membrane by reducing the chances of it fouling
• Auto Shut off Valve – Will automatically switch the system off when back pressure is detected.
• Drain Saddle Valve – To connect the system waste outlet to your property’s drainage
• Feed Water Connector – To connect the system inlet to your property’s water supply